`isaac_ros_jetson_stats`

Source code on GitHub.

Quickstart

Set Up Development Environment

Set up your development environment by following the instructions in getting started.

Clone isaac_ros_common under ${ISAAC_ROS_WS}/src.

cd ${ISAAC_ROS_WS}/src && \
   git clone -b release-3.2 https://github.com/NVIDIA-ISAAC-ROS/isaac_ros_common.git isaac_ros_common

(Optional) Install dependencies for any sensors you want to use by following the sensor-specific guides.

Note

We strongly recommend installing all sensor dependencies before starting any quickstarts. Some sensor dependencies require restarting the Isaac ROS Dev container during installation, which will interrupt the quickstart process.

Build `isaac_ros_jetson_stats`

Install jtop on the host machine:
```
sudo pip3 install -U jetson-stats
```

Launch the Docker container using the run_dev.sh script:

cd ${ISAAC_ROS_WS}/src/isaac_ros_common && \
./scripts/run_dev.sh

Install the prebuilt Debian package:

sudo apt-get update

sudo apt-get install -y ros-humble-isaac-ros-jetson-stats

Clone this repository under ${ISAAC_ROS_WS}/src:

cd ${ISAAC_ROS_WS}/src && \
   git clone -b release-3.2 https://github.com/NVIDIA-ISAAC-ROS/isaac_ros_jetson.git isaac_ros_jetson

Launch the Docker container using the run_dev.sh script:

cd ${ISAAC_ROS_WS}/src/isaac_ros_common && \
./scripts/run_dev.sh

Use rosdep to install the package’s dependencies:

sudo apt-get update

sudo pip3 install -U jetson-stats && \
   rosdep update && rosdep install --from-paths ${ISAAC_ROS_WS}/src/isaac_ros_jetson/isaac_ros_jetson_stats --ignore-src -y

Build the package from source:

cd ${ISAAC_ROS_WS}/ && \
   colcon build --symlink-install --packages-up-to isaac_ros_jetson_stats --base-paths ${ISAAC_ROS_WS}/src/isaac_ros_jetson/isaac_ros_jetson_stats

Source the ROS workspace:

Note

Make sure to repeat this step in every terminal created inside the Docker container.

Because this package was built from source, the enclosing workspace must be sourced for ROS to be able to find the package’s contents.
```
source install/setup.bash
```

Run Launch File

Run the following launch files to spin up a demo of this package:
ros2 launch isaac_ros_jetson_stats jtop.launch.py

Visualize Results

Open a new terminal inside the Docker container:

cd ${ISAAC_ROS_WS}/src/isaac_ros_common && \
./scripts/run_dev.sh

Check that the rqt robot monitor plugin is installed.

sudo apt-get install ros-humble-rqt-robot-monitor

Open robot monitor.

rqt

Open rqt view

From menu open the Diagnostics Viewer Plugins -> Robots Tools -> Diagnostics Viewer
Select the checkbox “Alternative View”
Verify that rqt starts displaying the diagnostic status of the Jetson:

Control your Jetson

You can control your Jetson using the following services:

jtop/fan: Change the fan speed configuration.
jtop/nvpmodel: Change the NVPmodel of your board.
jtop/jetson_clocks: Enable or disable Jetson Clocks.

Change the Fan Speed Configuration

An example to change the fan speed configuration:

ros2 service call /jtop/fan isaac_ros_jetson_stats_services/srv/Fan "{'profile':quiet ,'speed':100}"

This command will change the fan speed configuration to 100% and the profile to quiet. You can change the profile to quiet, cool, or manual.

These profile can change depending on JetPack version and Jetson model. You can check the available profiles from the documentation reference.

Change the NVPmodel of your board

An example to change the NVPmodel of your board:

ros2 service call /jtop/nvpmodel isaac_ros_jetson_stats_services/srv/NVPModel  "{'nvpmodel':0 }"

This command will change NVPmodel on your board. To check the available NVPmodel, you can check the documentation reference.

Note

Not all NVPmodel are available on all Jetson models. You can check the available NVPmodel from the NVIDIA Jetson documentation reference.

Note

Not all NVPmodel can be set without a reboot. If it fails you need to change manually on your board.

Change the Jetson Clocks

An example to enable Jetson Clocks:

ros2 service call /jtop/jetson_clocks isaac_ros_jetson_stats_services/srv/JetsonClocks "{'status':true}"

This command enables Jetson Clocks. You can disable Jetson Clocks by changing the value to false.

Troubleshooting

`jtop` Not Working

Symptoms

The jtop node fails to start.

Solution

Exit the Docker container and install jetson-stats on your host:

sudo pip3 install -U jetson-stats

Mismatch version `jtop` service and client

Please update your jtop package on your host and reboot the Isaac ROS container.

sudo pip3 install -U jetson-stats

You may need to reboot the host.

Diagnostics Viewer doesn’t appear

If the Diagnostics Viewer doesn’t appear when you are running rqt:

rm ~/.config/ros.org/rqt_gui.ini

This command will refresh rqt, updating the list of all plugins available.

API

Launch `jtop` Diagnostic Monitor

ros2 launch isaac_ros_jetson_stats jtop.launch.py

ROS Parameters

ROS Parameter	Type	Default	Description
`interval`	`double`	`0.5`	When you initialize `jtop` you can setup a communication speed interval; if there is another `jtop` running, this speed will be not used.

ROS Topics Published

ROS Topic	Interface	Description
`diagnostics`	diagnostic_msgs/DiagnosticArray	Diagnostic message.

ROS Services Advertised

ROS Service	Interface	Description
`jtop/fan`	isaac_ros_jetson_stats_interfaces/Fan	A service change the fan speed configuration.
`jtop/nvpmodel`	isaac_ros_jetson_stats_interfaces/NVPModel	A service to change the NVPmodel of your board.
`jtop/jetson_clocks`	isaac_ros_jetson_stats_interfaces/JetsonClocks	A service to enable or disable Jetson Clocks

isaac_ros_jetson_stats