thor_devkit_realsense_rig_description#

Source code available on GitHub.

Overview#

The thor_devkit_realsense_rig_description package provides the URDF description and mesh for the rig that mounts three Intel RealSense cameras (D435/D455) on the Jetson Thor Developer Kit at known nominal positions.

Quickstart#

Set Up Development Environment#

  1. Set up your development environment by following the instructions in getting started.

  2. (Optional) Install dependencies for any sensors you want to use by following the sensor-specific guides.

    Note

    We strongly recommend installing all sensor dependencies before starting any quickstarts. Some sensor dependencies require restarting the development environment during installation, which will interrupt the quickstart process.

Build thor_devkit_realsense_rig_description#

  1. Activate the Isaac ROS environment:

    isaac-ros activate
    
  2. Install the prebuilt Debian package:

    sudo apt-get update
    
    sudo apt-get install -y ros-lyrical-thor-devkit-realsense-rig-description
    

Run Launch File#

The nominal camera positions on the rig are described by these xacro files:

Continuing inside the Isaac ROS environment, load one of them and publish the camera relative positions and orientations by running the thor_devkit_realsense_rig_description.launch.py launch file:

ros2 launch thor_devkit_realsense_rig_description thor_devkit_realsense_rig_description.launch.py camera_model:=d455

Launch Arguments#

Launch Argument

Type

Default

Description

camera_model

string

d455

RealSense model that selects the nominal rig description. One of d435 or d455.

urdf_override_file

string

None

Path to a URDF file that replaces the nominal rig description.

calibrated_urdf_file

string

None

Path to a calibrated URDF file that overrides the nominal camera poses.

For instructions on building the rig itself, refer to the assembly guide.